Floor Heating Accessories | Lamex Bathrooms & Kitchens

Australian Owned & Operated  ·  Trade & Retail Welcome  ·  Fast Dispatch Australia-Wide
Bathroom Heating

Floor Heating Accessories: Sensors, Repair Kits and Tape

Sensor probes, installation monitors, repair kits and insulation tape to support your floor heating installation.

Shop Floor Heating Accessories
Ametalin reinforced insulation and ducting tape for floor heating installation

Why choose floor heating accessories from Lamex

  • Sensor probes in 3m and 10m lengths for accurate thermostat readings
  • Installation monitors check cable continuity before flooring is laid
  • Repair kits available for each floor heating cable type
  • Reinforced insulation and ducting tape for cable fixing
  • Small parts to complete a professional floor heating install
  • Useful for both new installs and servicing existing systems

How to choose the right floor heating accessories

A floor sensor probe is what tells your thermostat the actual floor temperature, so its length needs to reach comfortably from the thermostat location to the sensing point in the floor — 3m and 10m options cover most typical runs. An installation monitor is worth using during the install itself: it checks the cable's continuity and resistance while it's still exposed, so any fault is caught before flooring is laid over the top and the cable becomes inaccessible.

Reinforced insulation and ducting tape is used to fix cable to mesh or a substrate and to seal joints cleanly during installation. If a cable is later damaged, a repair kit matched to that cable type can often fix a localised section rather than requiring the whole system to be replaced — have a licensed electrician handle any repair or replacement work.

Frequently asked questions

What does a floor heating installation monitor do?
An installation monitor checks the heating cable's electrical continuity and resistance during and after laying, before flooring goes down. It gives an audible or visual alert if the cable is damaged, so problems can be found while the cable is still accessible.
What length sensor probe do I need?
Sensor probes are available in 3m and 10m lengths. The right length depends on the distance between your thermostat location and the point in the floor where the sensor needs to sit — check this distance before ordering.
Can a damaged floor heating cable be repaired without lifting the whole floor?
A repair kit matched to your cable type can often fix a localised fault by exposing and repairing just the damaged section, avoiding the need to replace the whole system. A licensed electrician should carry out the repair.

Ready to shop Floor Heating Accessories?

5+ options in stock, ready to order online or in-showroom.

Shop Floor Heating Accessories now